The finished plasters are available in two versions: for application by machine or manually. The difference between the way they are applied to walls and ceilings affects the cost of finishing work and the choice of the appropriate team, and renting a plaster station can also be useful, which can save you money.Machine-made plaster is more expensive than manual, but it will take much less time. It should be remembered that the price, regardless of what is applied manually or by machine, is calculated per square meter of plaster with a thickness of 0.8-10 mm.Traditional manual plasterers are applied manually, dissolved with water using an agitator with a drill, and their bases are applied to the wall or ceiling, aiming for an equal mass distribution. All other processing actions are identical. Even the tools are the same.Manual application of cement-lime plasters takes a very long time. There should always be three layers. In short, because gypsum plaster fits into one layer. The mortar is leveled with a long metal trowel on the previously cured plaster, depending on the temperature.This method is usually used by small companies, especially when the surface coverage is relatively small (up to 50 m2) or difficult to access, for example, for processing the internal slopes of window and door openings. Productivity increases with more people working at the same time.Manual production of plasters (materials and repairs), plaster costs 180-230 rubles / m2, and cement-lime - 200-230 rubles / m2.Machine-made plaster Obtained from ready-made mixtures, machine weights differ from manual ones in that they have the plasticity required for hose supply and have a long setting time so that they can be leveled and smoothed after application.With the help of a plaster aggregate, the solution is applied much easier and faster than in the traditional way. Plastering with this method is recommended when the house is large. The finished mixture is poured into the room of the refrigeration station and the required amount of water is added. After mixing, the plaster is evenly applied to the pre-painted wall. Cement and cement-lime plasters are applied in three layers, and gypsum - in one. The work on gypsum plaster takes three times less. Two people are enough - one applies the plaster, the second compensates for the layer applied by the other. A skillful performer can make, thus, 80-120 m2 of gypsum plaster per day.Moreover, when plastering walls using the machine method, two times less material is consumed than with the traditional method. For an investor, this means real savings.For the material for laying gypsum plasters, you need to pay 250-270 rubles / m2, and cement-lime 280-300 rubles / m2. Safety should never be compromised for a bonus. Before you enter your email or phone number, read our safe online bookmaker reviews section. We verify SSL encryption, licensing information, and data protection policies. A top bookmaker must have 24/7 customer support and clear terms of service. If a site hides its wagering requirements in small print or doesn't offer responsible gaming tools, we remove it from the list. Protecting your funds is our priority. Always enable two-factor authentication if the platform allows it. Remember that a licensed bookmaker is legally required to process, unlike unregulated clones.
